← Back

Parameters · 7 min

Feed per revolution and feed per minute

Convert safely between mm/rev and mm/min and confirm the active feed mode.

Convert safely between mm/rev and mm/min and confirm the active feed mode.

Feed per revolution and feed per minute have different meanings. Copying an F value without checking the active mode can create an aggressive entry or rubbing instead of cutting.

Basic relationship

Vf = f × n. At f = 0.20 mm/rev and n = 1200 rpm, Vf = 240 mm/min. Conversely, f = Vf / n for nonzero speed. Keep the units visible: mm/rev, rpm and mm/min. These are mathematical conversions, not recommended cutting data.

With constant surface speed

Under G96, spindle RPM changes with cutting diameter until the programmed limit is reached. A feed-per-revolution mode keeps the programmed travel per revolution, while mm/min changes. This does not guarantee constant chip thickness for every geometry. Confirm the actual control’s feed codes: G94/G95 and G98/G99 are not interchangeable across all controls.

Quick check

Calculate expected mm/min at the starting and smallest diameters. Check the spindle ceiling, tooling data, machine limits and workholding. Never copy an F value until its units and active mode are verified.

Haas · G98 · Haas · G99