Balance insert strength, finish, radial force and vibration when selecting nose radius.
Nose radius affects edge strength, surface finish and radial forces. A larger radius does not always improve a flexible workpiece or setup.
Small radius
A smaller radius can reduce radial forces and vibration tendency in thin walls or slender parts, but provides a less robust corner. Check the profile requirement, finishing allowance and the manufacturer’s feed and depth range.
Large radius
A larger corner can support heavier cuts in a sufficiently rigid setup, but radial forces can rise. If chatter appears, review radius and rigidity rather than automatically lowering speed. Verify actual finish and dimensional stability.
Feed relationship
Select feed, depth, radius and chipbreaker together using the manufacturer’s application range. Very light cuts can rub or form long chips. Do not infer achievable roughness from radius alone; wear, geometry, vibration and material also matter.