Understand how G94 and G95 change the programmed F value.
G94/G95 can define feed units on some controls, but do not assume that meaning on every Fanuc lathe. Some lathes use G98/G99, and G94 can have a different function.
Confirm the control first
Identify machine model, control, G-code system and operation in its manual. On a control that defines G94 as feed per minute, metric F is mm/min; where G95 is feed per revolution, it is mm/rev. Haas lathes document G98 and G99 for these feed modes. Milling cycles may assign other meanings to the same codes.
Program the intended mode
Use the documented mode explicitly and verify metric or inch units. Do not rely on a previous program’s modal state. Fixed or variable RPM and the active feed mode must be checked separately.
Numerical risk example
At 1000 rpm, 0.20 mm/rev gives 200 mm/min. The same F0.20 interpreted as mm/min is 1000 times slower. This illustrates a unit error, not recommended cutting data; either setting still requires tool and process validation.