Diagnose runout, poor chip evacuation, instability and breakthrough damage.
A solid-carbide drill can fail through runout, poor chip evacuation, instability or unsuitable entry or exit conditions. Reducing feed alone does not establish the cause.
Checks before cutting
Measure runout against the tool manufacturer’s limit; do not assume one universal tolerance. Check holder cleanliness and tightening, minimum necessary overhang and a validated entry strategy. Verify coolant flow and pressure required for the drill and hole depth.
Read the failure
One-corner chipping may suggest runout or misalignment. Fracture near the shank may involve chip jamming or bending. More uniform wear can indicate accumulated wear or unsuitable thermal conditions. These are hypotheses: compare damage with the process history and manufacturer troubleshooting guidance.
Correction sequence
Check geometry and rigidity first, then coolant and chip evacuation, and finally cutting speed and feed. Do not reuse a drill with suspected cracks. Avoid unapproved dwell at the bottom. Adjust breakthrough strategy only as specified for the drill, material and exit geometry. Document the change before a controlled trial.