Units and assumptions
f in mm/rev × n in rpm = Vf in mm/min. For cutting time: t = L × N / Vf, with L in mm per pass and N identical passes. Include the feed travel you intend to estimate in the length. The model assumes constant spindle speed and feed.
Example: 0.20 mm/rev × 1,200 rpm = 240 mm/min. Check whether the control expects feed per minute or per revolution; commands and modes depend on the machine.
Theoretical feed time, not complete cycle or batch time. Rapid moves, tool changes, loading, inspection, acceleration, waiting and setup are excluded. With G96 or variable RPM, split the motion into segments or use a specific model; this is not a safe parameter recommendation or measured productivity.
Sandvik Coromant · Formulas and definitions for turning (metric)